Key FOB question

[RC-Calypso]

When replacing the battery in the key FOB , the owner's manual explains that the transmitter needs to be resyncchrinized.
Does anyone know what that involves?:mpr:

I'm fixin to change the batteries on both units of my '03 Hoe and thought it would be wise to check the manual before.

Thanks.:cool2:

 

[tast101]

I have the step to reset it. I'll grab it and let u know.

 

[TravisH]

http://www.tahoeforum.com/showthread.php?p=45929#post45929

 

[FergHoe]

Thanks TRAVIS you beat me to it


I know this works on 00-02

Close all the vehicle doors.
Insert the ignition key into the ignition lock cylinder.
Press and hold the DOOR unlock switch.
While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
Release the DOOR unlock switch. The doors will lock and unlock to confirm the program mode.
Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
Repeat the previous step to program up to four transmitters.
Turn the ignition switch to the RUN (one more click forward) position in order to exit the keyless entry transmitter mode.
Operate the transmitter functions in order to verify correct system operation.

hope it helps

 

[RC-Calypso]

That was quick.

Thanks guys.
Now I know what to tomorrow evening.

Hope it goes ok, otherwise the wife will be staying home the next day.