Heater/AC Control

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

apowell94

New Member
Joined
Oct 9, 2008
Messages
8
Reaction score
0
The switch only works in the high position. I've replaced the switch and still have the same problem. Another member suggested it might be a resistor. Any ideas? Where is the resistor?
 

Audio1Tahoe

New Member
Joined
Oct 13, 2008
Messages
2
Reaction score
0
There is a relay and fuse under the hood in fuse box. I had the same prob and changed mine. Hope this works.
 

apowell94

New Member
Joined
Oct 9, 2008
Messages
8
Reaction score
0
I finally fixed the problem. It was the blower motor resistor pack. It is located behind the glove box on the blower motor. There is a relay on top of the blower motor and the resistor back is under it. Just unplug it and take out a few screws. The part was $16.20 at Auto Tire Parts/NAPA and $25.00 at Oreilly's.
 

devilblue14

New Member
Joined
Jul 30, 2008
Messages
2
Reaction score
0
Location
Longview, TX
Hvac fan speed problem

I had the same problem some of the other guys did. My fan only worked on high. I replaced the Blower motor resistor and it fixed my problem. I got the part from autozone for $15.99. Thanks guys!!
 
Top