Break problems after changing wheel bearing hub ass.

[KingColumbia]

Hi All,

New member and first post. I own a 2007 Tahoe and I just replaced the wheel bearing hub assembly on the right front. The Tahoe was making a noise and shuttering when breaking before the fix and now it seems to be gone.

There is one huge issue now post fix... the breaks don't work!!!! I didn't touch the break system (only to replace the abs cable that came with the wheel bearing). Now sure what happened and I'm confused now.

We did bleed the breaks and still have a problem. not sure what to do.

Thanks for your help,
Bryan

 

[Suburbinator]

So that side you touched doesn't work at all?

Are all the parts assembled correctly?

Is the brake line kinked or twisted?

If the other side wasn't touched, use it as a guide to verify.

 

[KingColumbia]

The break pedal goes to the floor. Its not that one side doesn't work, none of the breaks work. Its not a kink (I wish it were that simple). Everything was assembled correctly. There isn't any break fluid dripping or on the ground or on the line. Very strange....