2006 Yukon Overheating

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Zebra

New Member
Joined
Jul 10, 2011
Messages
4
Reaction score
0
My yukon is overheating Checked and coolant is full. Then I noticed electric cooling fans not running replaced all 3 relays 2-4prong 1- 5 prong. Its still getting hot and the fans are not coming on. Any Idea's


Thanks George
 

Zebra

New Member
Joined
Jul 10, 2011
Messages
4
Reaction score
0
Anyone tell me the location of the coolant temp sensor ?
 

Zebra

New Member
Joined
Jul 10, 2011
Messages
4
Reaction score
0
ok replaced coolant temp sensor and all 3 relays still no fan action and engine gets hot
 

dz2a8r

New Member
Joined
Jul 26, 2011
Messages
12
Reaction score
0
when the engine is hot turn it off and leave the key on, use a test light and back probe the connector on the fans,use a test light with a tpin so you can probe the hot and the ground side with the test light, if the test light lights up youll have to repalce the fans, if it doesnt light up ground the test light and and check for power to the fans, if you have power to the fans at this point its a ground issue, if you dont have power its most likely a power issue......just a good place to start
 
Top