Search results

I cant see the youtube video at work so I don't know what it is, but the blower motor resistor will fix the problem. Mine only worked on 5. I replaced the resister and it is working fine now. Its below the glove box on the bottom of the blower motor. Took me about 20 minutes to change. It was...

yes. pull the rotor off, the inside of the rotor acts as a drum brake for the e-brake.

take the rear wheels off and replace the e-brake pads. Someone probably drove around with the e-brake on.

i've never heard of outlawed spinner rims. Whats the reasoning behing that? lol

Anyone know if any of the hand held tuners can turn off the rear O2 sensors.

saw some on ebay once

I called a local shop a while back here in Orlando. They would do all three rows in better quality leather than the stock seats for around 1,000. They would do it however you wanted, two tone, different color stiching, roped edeges, whatever. When I get around to doing it, They will be doing it...

should be very simple. Not looking at it right now, but I believe it is right there on top. put a socket on the tension pulley (top left) and pull it till you have slack to remove the belt. Once the belt is off, unplug the alternator then unbolt it....should be 2 bolts, sometimes 3 on some cars...

my 01 Yukon is doing the sme thing. It will get worse! It is the sending unit in the tank. This is a common problem for this truck. My brother-in-law is a mechanic for GM and his Chevy started doing it also. I need to order mine, just haven't felt like dropping the tank lately. The altinator...

sweet, I have worked with you guys a bunch. I worked Aircraft Structures for 4 years at Luke AFB on the lil F-16's....rock on man and thanks for serving...

true on the fuel pump...forgot about that...but that whine will always be there...gear whine should only be there when your on the gas and not coasting. Fuel pump you can hear while sitting still...

looks good..what do you do in the AF?

probably the worn gears. They usually only whine under a load, as in when you have your foot on the gas, if you coast, you probably do not hear it. Eather way, it sounds like you need new gears. I have a 2001 Yukon and had that whining noise around 115K miles. After new gears...no noise....

you looking for street or all terrain?

2001 Yukon 5.3....now at 191K and only a rebuilt trans.

My 2001 did not, and when my 4x4 module went out and I only had 2wd, I got stuck several times on a pretty packed dirt road. One tire would be in the soft ditch, and the other rear tire on the hard road. Which tire do you think pulled? Of course it was the one in the ditch. So after my dad...

FYI....If you noticed...I also moved my 7 pin trailer plug next to the liscnese tag so that it dosent get damaged from a little off roading...

thanks guys....good luck if you try it and remember to TAKE THE BUMPER OFF to do it. It will be alot easier. And lay down a few towels for the chrome to lay on so it dosen't get scratched. I didn't do that at first :(

You can buy a metal hole saw from home depot or lowes. Find out the size of the lights you are buying, double check the diameter at the widest point that will be sticking through the bumper and try to get that size hole saw or 1/8'' bigger at the MOST. If you get the exact size, the hole can be...

I will post more pics tommorrow and try to get some from the back side so you can see how I mounted them. I have them wired to a switch cause you probably don't want them blinding someone behind you just backing up somewhere where there is traffic. These things are awsome for backing up in the...