I have a 2005 Yukon XL 1500 SLT and both the service stability and service ride control messages are on. The first the srevice stability was just on and abs engaging so i changed the wheel hub and sensor. That stopped for about an hour now both messages are up. Truck drives normal and i just don't know what to do now. I also changed the driver's rear position sensor. All help will be appreciated. Thanks!!
Service Ride Control and Service Stability
- Thread starter Jay
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
PNW NBS Z71
Member
You may have to replace both front wheel hubs and sensors and not just the one. You also need to inspect and repair as needed all the wiring from front and rear sensors. You may also, especially if live in the rust belt, need to go thru this: https://www.fixmyoldride.com/Chevro...e7e5cd24ed24635&at_ab=per-2&at_pos=3&at_tot=4
Similar threads
