Removing Instrument Cluster

[interdpth]

Hi, I'm trying to fix an Instrument Cluster for my Tahoe, but I'm at a loss to how to remove it without taking the whole dash down.
It's an early Tahoe, she runs great but the MPH doesn't go up and my lights don't go on for the dash so I'm trying to get back there, I can't find a tutorial or anything for it online, so any help would be awesome, here's some pictures of the current state.

Thanks!

 

[lesterl]

What year is your S10? Might try S10forum.com .......
BTW picture was WAY TOO LARGE to fully view.

IIRC on my S10's, the dash has a plug on the back of it behind the top part of the speedo and you take
out the 4 screws holding in the back 1/2 of the cluster and tug it out, older cable driven S10's you had
to pull it out part way and sneak your hand in behind to disconnect, IDR what year they went electronic
speedo, but I would suspect around 88-89 or so (IIRC of course). Now if you have no speedo, if electronic,
check the sensor in the tailshaft of the trans, and check the wiring to the DRAC.....