MSD coil upgrade

[JP422]

Yeap.. for the most part....

-Plug and play the MSD 6A... to the oem harness + coil. Then hook up ground and (+) to battery.
-The coil is a direct fit... but you gotta grind off the rivets to install it.
-The 8.5mm ign wires are pre-finished, so you just replace them like oem (includes coil wire too).
-Enjoy.

 

[Tigg]

Yeap.. for the most part....

-Plug and play the MSD 6A... to the oem harness + coil. Then hook up ground and (+) to battery.
-The coil is a direct fit... but you gotta grind off the rivets to install it.
-The 8.5mm ign wires are pre-finished, so you just replace them like oem (includes coil wire too).
-Enjoy.

Thank You

 

[BlackRain]

What spark plugs are you guys running with this setup? I am getting the MSD setup come tax return.

 

[treepete]

I have some splitfires in there from forever ago.

and welcome to the forum BlackRain guy.

 

[BlackRain]

Thanks for the welcome.

I have always run NGK's. Did some searching for NGK and MSD, and found that others, T/A's, are running MSD wires and NGK TR55's. I am going to try them out. I will start my own thread when I get all this.

 

[JP422]

I don't remember exactly, but I think I dropped in NGK or Denso Iridiums a couple yrs ago.