Lock pick install, now no rear camera video?

[goldenrod49]

Has anyone else had this problem? The GMX-320 install went fine and works as it should but the factory back up camera has no video feed. When I put the hoe in reverse I DO get the screen switching over to rear camera and the message across the top in yellow is also there but no actual image. I have a 2008 Tahoe LTZ with all factory Nav, Rear DVD and Camera. Dip switch 1 and 2 are down, 3,4 and 5 up. I did NOT do the splice step to turn on the camera anytime and no other video/aux sources on the lock pick are being used. For my application should all of the harness's have been used?
Any info will be greatly appreciated! I plan on opening it up again on Tuesday if anyone has any thoughts.

 

[Snomon]

You cannot be in XM when you want to turn the camera on. I freaked out the first time.

-or- the blue wire that runs to the blackbox under the passenger seat isn't hooked up correctly.

 

[goldenrod49]

I did not hook up the blue wire and I do not use XM. I have Sirius through the AUX jack. Any other thoughts?
Thanks.

 

[Snomon]

Oops, I misread your question. I thought you were having problems trying to turn camera on via the lockpick. Sorry.

 

[06Evolved]

Sometimes the harness to the actual lockpick box comes loose. This happened to mine and I just went back and made sure it was connected properly. That was all that was wrong with mine. It works every time now.

 

[rsmitty115]

were you able to correct this issue? Just hooked up my lockpin and I am expierencing the same problem.

 

[Hill1430]

I installed the lockpic in my 07 Suburban last night and also had no video.

 

[rsmitty115]

hill 1430, did you hook up the blue wire in order to view the camera while the vehicle is in motion?

 

[goldenrod49]

Yes, it is fixed. There was one wire coming from the Lock Pick's brown harness connector that was pulled out. I don't know if it happened during the first install or what but that was the problem.

 

[Hill1430]

yes the blue wire was hooked up.

 

[Hill1430]

I just looked at my harness, the yellow and black wires in the brown connector were loose.

 

[rsmitty115]

Hill 1430, I guess I was asking if you opted to hook up the optional rear camera view while in drive. The previous post had said that they did not cut the blue wire. I will pull things apart again tomorrow, but it is bugging the heck out of me as to why this thing won't work.

 

[rsmitty115]

Is it as simple as just pushing the wires back into the harness?

 

[rsmitty115]

Just pulled it apart again, found the yellow wire was loose in the harness. I appreciate all the input, was a big help!