Electrical connector help needed

[squeasel]

Greetings All, I have installed a new FI spider on the 1996 Tahoe 4dr, 4wd, 5.7L V-8. Almost everything is back together except the blue connector shown in the photos next to the orange tag on the wiring harness. My notes tell me that it was mounted on an upper manifold stud bracket below the PCV? hose. I marked it as J3 which would mean that three items were on the bracket (a second item is a vacuum hose). I can find no other items and am worried that I have somehow lost a connection. Can anyone tell me where this blue connector belongs? FWIW the wiring to the main harness is very short. Much thanks, -Bret

 

[lesterl]

what color is the wire?

 

[squeasel]

Hello LesterL ... there is a single GREEN wire that seems to go from the blue connector to a main wiring harness. -Bret

 

[squeasel]

Follow Up: I found the other end of the connector (it had fallen to the exhaust manifold around #7 cylinder). It seems to be coming from the water temperature plug at Spark Plug level on the drivers side of the block. I have reconnected it. All seems to be well.

 

[lesterl]

I was gonna post back usually a single green wire will be the dash temp guage feed.... but I guess you found it.....

 

[squeasel]

@lesterl this was the last item on the MFI installation. I was happy that I did not run the engine to temp last night or I might have melted the connector. Cheers!