biggest an widest tire for stock applications.

[99ta-hoe]

i was just curious, whats the biggest an widest tire that can go on stock applications with little rubbing

ive seen that 285/75/16's will go with little to none rubbing..

curious if some 33 12.5/11.5 16's would fit with little to none rubbing.

 

[99ta-hoe]

or maybe some 35's

 

[Bad bow tie]

I have 285/75/16 BF Goodrich All Terrains on my 2 door Tahoe that is completly stock and have no rubbing at all. 305/70/16 might fit they are an inch wider than the 285/75/16. A 33x11.50x16 is the same as the 285/75/16 and the 33x12.5 is the same as the 305/70/16. As far as 35" tires, not without a lift of some sort.

 

[99ta-hoe]

are those on stock rims or aftermarket?

 

[Bad bow tie]

Stock rims, I would like to get some 16x8" Mickey Thompson Classic II's to put on it this summer though.

 

[992door]

This one has 33x12.50r15 on 15x8 he had cranked his torsion a little

 

[chevyrider]

This one has 33x12.50r15 on 15x8 he had cranked his torsion a little

Thats a 3 in. body lift it looks like, so theres going to be plenty of clearance on that particular setup.

 

[992door]

He does have a body lift on it in that picture let me find one where he dont

 

[992door]

this is the one where he dont have a BL in the other he has a 2" BL

 

[chevyrider]

nice, looks good either way, i like the "blacked out" look he has.

 

[992door]

you could do this it is 3"BL and 36s

 

[99ta-hoe]

why did he go with the 15 inch rim.// either way i like all 3.

 

[992door]

that is just what he wanted at the time. Then he went to a 2" body lift and 305/70/17 on the z71 tahoe wheels and now he just got a 6" lift and 37s

 

[hutchem]

I run 285/75R16 BFG AT's on stock rims with only rubbing on the lower control arm when turning sharply on a downgrade or upgrade. I personally think this is a good tire size for stock 4x4's.

 

[rockymt21]

Im going to be buying some 315/75/16's in March. I'll let you know how the work out.

 

[992door]

good luck fitting those if you dont have a lift

 

[rockymt21]

I've seen 305's fit stock, what's 10 more mm going to do? If they rub too much I'll go with a 3" body lift.

 

[992door]

you do know that that is basically a 35X12.50 right. i mean it can probably be done

 

[rockymt21]

Would a 305/70/16 be the equivalent to say a 33" x 11.5"?

 

[992door]

285/75/16 33x11.50

305/70/17 33x12