95 running rich and more

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

lesterl

Full Access Member
Joined
Oct 10, 2011
Messages
2,597
Reaction score
1
Location
MO
If you have a code, post it and if it isnt obvious what the code means we can discuss it here......
 

Fishtrap

New Member
Joined
Jul 20, 2013
Messages
15
Reaction score
0
Ok, the only code was 12 and it kept repeating. I had the CTS unplugged, stupid me. Plugged it back in and it started. Put a meter on it and it read -1. Not an electrician, so I don't know what that means.
 

lesterl

Full Access Member
Joined
Oct 10, 2011
Messages
2,597
Reaction score
1
Location
MO
Code 12 is for no signal rec'd from distributor (not turning/ running).

You want CTS UNPLUGGED and then ohm across the 2 pins in the thing (no wires hooked up from truck to it)..... Post your ohms and approximate ambient temperature...
 

Fishtrap

New Member
Joined
Jul 20, 2013
Messages
15
Reaction score
0
Replaced the CTS. The only code the I found was 12. Looked it up online and 12 is running normal on the list that I saw
 

lesterl

Full Access Member
Joined
Oct 10, 2011
Messages
2,597
Reaction score
1
Location
MO
Code 12 is a code, it just doesnt mean anything but that the ECM does not detect the engine turning (which it isnt since you have it in run but havent started it.)

What did the CTS Ohm out at?
 
Top