24s on a stock height yukon?

[s1m0n]

Would they fit? any rubbing?

 

[Sepiroth]

They might rub on the innermost plastic fender liner. I would watch your offset. If that is not possible, just be sure that you dont rub into your washer fluid resorvoir.

IMHO, if you keep the height of the 24" tire relative to the height of the stock size tire, you should not any issues dealing with ride height.

 

[667theneighbour]

The height of the rim is the only thing that doesn't matter. Everything else does.

 

[s1m0n]

so what about a 24" rim with a 305/35 tire

 

[Sepiroth]

What size tire do you have on the truck now?

This site should make it easier for you.

http://www.1010tires.com/TireSizeCalculator.asp

A 305-35 is almost two inches taller than stock.

 

[667theneighbour]

so what about a 24" rim with a 305/35 tire

There's a good chance of some rubbing. 295/35R24 should work.

 

[JKmotorsports]

A 305/35/24 tire shouldn't rub at stock height if you have the proper offset wheels. Mine didn't rub at stock height nor after I put on my 2/3 drop. But now with my 3/5 drop, I get some rubbing on tight lock to lock turns. The offset on mine are 30mm IIRC. Offset is what's going to be the biggest determining factor, especially with 305/35/24 tires.

 

[s1m0n]

right now im running stock tires 265/70/16s