Been working the brakes on my 2003 Tahoe 4WD, had a rear caliper go bad and lost some fluid, I replaced the rotor and caliper and pads, when I tried bleeding the rear brake caliper I could get very little fluid to come out and brakes are really soft and go nearly to the floor and are not moving the caliper pistons at all , I tried to bleed the other side rear caliper and got the same result as the first one, fluid barelyy coming out, what do I do next here ? bleed master cylinder ? , brakes were fine before the caliper went bad, also the "service brakes" light is on thanks in advance.
Last edited:
