rubbing

[john wht]

I have a 2013 Tahoe ltz. I just lowered it 2" with Belltech parts. I have GM moulded mud flaps all around and still using factory 20" wheels & tires. I am getting some rubbing on sharp turning. Any Ideas ??

 

[07burb]

Trim up the plastic fender liners where it rubs. problem solved :waytogo:

 

[Ont240]

Would be nice to see a couple of picture now that it's lowered. Been thinking of doing it as well. Is the rubbing when it's fully loaded, or turning?

 

[07burb]

Would be nice to see a couple of picture now that it's lowered. Been thinking of doing it as well. Is the rubbing when it's fully loaded, or turning?

Most likely turning just at full lock. Mine used to do the same thing until the inner fender liners were trimmed. I'm dropped 2/4 on an '07 Burb

Here's a pic:

 

[john wht]

I'll get some pics when I can get out. Dealing with a medical issue. Thanks for info.

 

[john wht]

2" drop

Here is a pic. of my 2013 tahoe w/2" BELLTECH drop

 

[Ont240]

Curious if these are both 4x4 ?

 

[john wht]

In reply to Ont240 my 2013 Tahoe LTZ is 4WD And it has Auto Ride Suspension. After getting a chance to investigate the rubbing issue. It appears that it rubs on the mud flaps at almost full turn. With the flaps installed it has the extra thickness of the flap in the way. It is not very bad and with some luck it will wear off soon. I like the look and the ride. ( feels like a SS Trailblazer I had ) The big thing is it is easier for my wife to get in & out.

 

[07burb]

Curious if these are both 4x4 ?

Yes, mine is a 4x4