Removing taillights and third brake lighht

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Myhoe07

New Member
Joined
Dec 19, 2011
Messages
6
Reaction score
0
Location
Yukon, ok
Hey guys

First of all I'm sure it's simple and stupid but how in the hell do u take OUT all three brake light ...I got some of that paint that smokes them I just can't get them out ....don't post stupid **** like "did you take out the screws"
And does the third brake light just pop off or what ?
 

bowtie_hoe

Full Access Member
Joined
Dec 21, 2011
Messages
68
Reaction score
0
Location
Ohio
there are two screws for each of the two lower lamps on the housing, which you can clearly see after the lift gate is open, as you know. Remove them, then with a little pull it will come out. What you don't see is two, for the lack of words...pressure tits (i don't know what to call them so that works), that are behind the lamp housing going into the sheet metal.

For the high stop, I haven't removed it before. I'm assuming with the gate open would be the method of removal. May require removal of some plastic trim pieces.
 
Top