rear door speakers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

96cherry

Full Access Member
Joined
Jul 11, 2008
Messages
109
Reaction score
0
Location
livonia
it wasnt until yesterday i realized that i didnt have any sound comming out of my rear door speakers. the ones in the very back work( kenwood 4x10's)and the ones in the front work(infinity 6and a half) i have a pioneer head unit with all the correct wires attached. anyone have any ideas?
 

bsamoul

Full Access Member
Joined
Jan 25, 2008
Messages
221
Reaction score
0
Location
The Bay, CA
attach the remote wire out of the head unit to the blue i think wire in the harness. that will send a signal to the amp under the drivers seat to turn that on and the rear speakers will work. you'll hear a click under the dash when the amp gets power on
 

96cherry

Full Access Member
Joined
Jul 11, 2008
Messages
109
Reaction score
0
Location
livonia
i also have subwoofers and an amp ran already would i just attach all three remote wires together?
 

bsamoul

Full Access Member
Joined
Jan 25, 2008
Messages
221
Reaction score
0
Location
The Bay, CA
you could. on my factory head unit i had the power to the amp tapped into the power of the unit. when i redid everything with the new radio, I reran those wires, so i have the rca in the back of the head, and have the power to my sub amp tapped into the orange wire of the amp under the drivers seat to get one less wire out of there. i have to say i really like that better. I would do that route, because there are so many wires.
 

96cherry

Full Access Member
Joined
Jul 11, 2008
Messages
109
Reaction score
0
Location
livonia
Just Tied In All 3 Remotes Now All The Speakers Work Thanks For All Your Help Guys!!!!
 
Top