Question About front Bumper

[BowTieBandit]

I was looking at my front bumper just now, I noticed a couple lite scratches. I went to rub them to see if they'd come off easy. So I rubbed it, and noticed one side of the bumper was kinda loose. So I'm looking it over, and didn't see any screws. Just those plastic push pins, is that all that's holding it on?

 

[Hoebag03]

i had an 00 shortwide and when i was driving thru the mud ( in a 2wd:thumbsup: ) i ripped the plastic lip off, when i went to put it back on i noticed 2 or 4 large bolts. im pretty sure that the clips only hold on that lip

 

[jayhawk25]

if your talking about the plastic type part below the chrome bupper then yes i believe all it is are the push pins, thats all i have seen on mine anyways. I recently had to replace one of them on the end but i just used a regular screw and nut rather than get a replacement at the dealership.

 

[BowTieBandit]

I looked and felt around best I could for right now, I'm at work so can't get dirty. But I felt underneath, and it seems there's about 4-5 of the plastic clips. And 3 on each side where it meets the wheel liner.

 

[BowTieBandit]

if your talking about the plastic type part below the chrome bupper then yes i believe all it is are the push pins, thats all i have seen on mine anyways. I recently had to replace one of them on the end but i just used a regular screw and nut rather than get a replacement at the dealership.

The Denali bumper is one piece all painted.

 

[Hoebag03]

if your talking about the plastic type part below the chrome bupper then yes i believe all it is are the push pins, thats all i have seen on mine anyways. I recently had to replace one of them on the end but i just used a regular screw and nut rather than get a replacement at the dealership.

i did the same, it was cheaper than buying pins from the dealer