New member.Front end question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

krfloors

New Member
Joined
Jan 17, 2008
Messages
14
Reaction score
0
Location
Kansas
Hey everyone. Love the forum here. I have a 99 tahoe 4x4 everything is stock. I just replaced the front rotors and pads, also the front and rear shocks. When going over a bump I get a rattle or a clunk out of the front driverside by the tire. I thought i just did not tighten the shock enough or something but that was not it at all. Any help would be greatly appriciated.
 

johnebgoode

Full Access Member
Joined
Sep 7, 2007
Messages
646
Reaction score
0
Location
Long Island
Check stabilizer bar bushings and link bushings. They usually start to go on older models and will generate noise if faulty. Make sure calipers are tight.
 

krfloors

New Member
Joined
Jan 17, 2008
Messages
14
Reaction score
0
Location
Kansas
ok that sounds like a good idea. calipers were tight so I think I will check the areas you said. Are they easy to replace?
 
Top