Lifted Spec's and Pics

[tahoejax]

2.5/1 ccm level kit with 285 65 18 nitto trail grapplers

 

[clkelley]

That is a GREAT lookin' Hoe!!! Nice job!

 

[akbrener]

Installed this kit yesterday. Took about 30 mins per side to slide the spacers in. Easily doable with a floor jack, a jack stand and a few wrenches. Truck sits perfectly level on all four corners. 38" on all sides.

I would reccomend this to anyone who is 2wd or looking to level their trucks and not "lift" their trucks. I have no intentions of running larger tires, just wanted to get rid of the factory nose dive stance.

Picture is not the best, but can see the difference.

stock:

Leveled:

 

[clkelley]

Looks great! thanks for sharing!

 

[hendedo]

Looks great!
WHich type or manufactuer is it. We have a 03 Z71 and what you did is exactly what i am looking for. I want to keep my factory Z71 wheels too.

Did you installit yourself?

Please respond to the type of kit and other info.

 

[NCFD4303]

Looks awesome.

 

[wavinwilly]

2.5/1 ccm level kit with 285 65 18 nitto trail grapplers

looks sweet man. i have the same setup but no tires yet. i am looking at those as well as some bfg's. do you have any rubbing issues or did you trim some? if so i would you have any tips or pics where you trimmed?

 

[Tahoe12]

How is the ride? I do allot of highway miles but need to go off road for work and want a few more inches to stop the lower spoiler from scraping. Did you have any issues with brake bias or did you need to do anything with the alignment once you were done? Your tRuck looks great and I really want to lift mine, but do not want to loose the way it rides as I put allot of miles on my rig.

Thanks.

 

[Maddawg]

2013 Chevy Tahoe LTZ
6" Zone Offroad Products suspension lift
35x12.50r18 Fuel Offroad Tires
18" BMF Novakanes in the Death Metal Finish


[/COLOR]Hey everyone I have a couple more pics cleaned up a little. I was able to pull in the garage but on the way out I hit the crossbar of the roofrack. How do I take off the cross bars?

 

[FT911]

Installed this kit yesterday. Took about 30 mins per side to slide the spacers in. Easily doable with a floor jack, a jack stand and a few wrenches. Truck sits perfectly level on all four corners. 38" on all sides.

I would reccomend this to anyone who is 2wd or looking to level their trucks and not "lift" their trucks. I have no intentions of running larger tires, just wanted to get rid of the factory nose dive stance.

Picture is not the best, but can see the difference.

stock:

Leveled:

Hello Dear,
i like your car, i've a Tahoe LT 2010 as well, as you said , to lift up the dropped nose , what leveling kit your using ? is it 2" or 3" ?
what you'd recomment, 2" or 3" ?
i am thinking to buy 1 from Rough Country,
gonna order form ebay
what do you think about the below product ?
http://www.ebay.com/itm/2007-2011-C...l:Tahoe|Year:2010&hash=item3a6f4c2c04&vxp=mtr
please let me know

 

[FT911]

2.5/1 ccm level kit with 285 65 18 nitto trail grapplers

Your Tahoe looks great,
bro what Lift/leveling kit your using ?
i am thinking to buy from Rough Country 2" , or shall i go for 3"

please advise
thank you

 

[[email protected]]

2.5/1 ccm level kit with 285 65 18 nitto trail grapplers

NICE !!! Just recieved my CCM kit eace:eace

 

[[email protected]]

2013 Chevy Tahoe LTZ
6" Zone Offroad Products suspension lift
35x12.50r18 Fuel Offroad Tires
18" BMF Novakanes in the Death Metal Finish


[/COLOR]Hey everyone I have a couple more pics cleaned up a little. I was able to pull in the garage but on the way out I hit the crossbar of the roofrack. How do I take off the cross bars?

SWEET !!!!!!:smokin:

 

[arnoldgers]

Awesome rig! Really like your BMF wheels, looks mean with the nitto trails.

 

[rwi2112]

4.5" Back spacing ??

I looked at a 6" Tough Country lift for my 2000 Tahoe LT and it says I need wheels with 4.5" back spacing. I have a set of 2012 Z71 wheels on it right now and I was wondering how to find out what my back spacing is ? I would like to throw some Fuel wheels on there with like a -24 offset. I know I would have to run 33s instead of 35s with that much offset but I can't afford the lift AND tires and wheels at the same time. Ergo, I need to run my factory wheels for awhile ;-( Anybody know a site that will give me the specs on factory Chevrolet Wheels ?

Thanks, Wayne

 

[jakl1313]

Lookn good! I was going to get a newer hoe but mine was paid for n I don't have any payments on any of my vehicles. I thought why not I'll just go ahead and work on the one I have. I'm glad I did it. However I still would like a newer hoe and white like yours!

 

[jtrayz4]

Could you please send me a link for the lift kit and give the the exact price. Looks great.

 

[crop_dustin]

2009 Custom Icon Coilovers with remote reservoirs and CDC, front Icon UCA, 18" method roost with toyo 35" opencountry R/t's... 6' lift

6" of travel in the front and 12.3" in the rear

 

[crop_dustin]

My front setup

 

[rh2256]

2005 Z71 leveling kit and 33" bfg

2005 Z71 leveling kit 20" procomp, w/ 33" BFG all terrain KO2