How To Wire Off Road Lights?

[Jesters.]

Does anyone have an excellent tutorial on how to wire up 2 off road baja lights? I've wired mine up before but I rigged it to where when i turned on my fog lights the baja off road lights would turn on at the same time.

But now I want to do it the normal way using a switch that my lights came with. If someone would please lead me in the right direction that would be great!

Thanks in advance!

 

[RenegadeTahoe]

There should be instructions with the switch and / or lights, but anyways....

You should run a fused lead off the battery (or other 12V source) to your switch. If you have a lighted switch, there will be 3 prongs. The middle is usually the source (12v), the top goes to the lights, and the bottom goes to ground. If you do not have a lighted switch, the bottom is your source, the top is your lights. Ground the lights, and test.

I would verify that your source and ground is where I said... I might be wrong.

 

[Jesters.]

Thanks, sounds simple!