How do I wire my Halo Projector headlights

[YukonJacks]

Just got my lights today, Thought it would be in and out. Heres my delema.
I have 4 wires coming from in the housing, 2 red aqnd 2 white. They go to a small black box filled with epoxy, and 3m sticky back tape and two red wires come out the other end.
Now the low beam is simple enough the existing plug goes right to the bulb.
Now coming off the high beam bulb a black and red wire are plugged into the bulb and on the other end is a female plug end similar the female plug end that is at the end of a bulb.

I have no Idea what plugs into this
Any help will be greatly appreciated

 

[Rollin Thunder]

are pics possable, this sounds confusing.

 

[YukonJacks]

How do I wire Halo Projectors PICS

Let see if the pics come through

 

[Rollin Thunder]

those two wires go on your parking lights. i need to check which wires. but thats the best spot for them. does not matter which wire on which.

 

[SoCal Tahoe]

what halos u get yukon? link?

 

[YukonJacks]

proexaust on ebay

 

[HitandRunDriver]

i actually bought from proexhaust also and regret it because the housing doesnt sit well, theres a big gap on the corners and it seems they're off kilter in general...

anyway, i believe the halos are wired into the DRL's or low beams.....i didnt do it myself, i had it professionally done because i refuse to mess with the wiring in my truck

 

[YukonJacks]

Halo Projector Lights

Got them installed this evening along with the leds for the license plate.
Not as difficult as I imagined. Once I got my fingers in it, Got them wired and installed in about 90 minutes, with minimal cursing.
Pics are soon to come, I am very satisfied with the lights from Pro Exaust. Nice product....

 

[Rollin Thunder]

Got them installed this evening along with the leds for the license plate.
Not as difficult as I imagined. Once I got my fingers in it, Got them wired and installed in about 90 minutes, with minimal cursing.
Pics are soon to come, I am very satisfied with the lights from Pro Exaust. Nice product....

do you know what low/high beam bulbs it used. stock 9006 /9005, or different bulbs? usually the bulb number is on the back of the bulb. :thumbsup: