BountyHunter
New Member
- Joined
- Feb 10, 2013
- Messages
- 6
- Reaction score
- 0
Replacement of the camshaft sensor on my 2007 Tahoe was supposed to be pretty easy. After removing serpentine belt it was no problem to access the sensor location. Removed the bolt from the sensor and then it would not come out. Tried for 2 hours. It would rotate and move in and out about a 1/4" but could not get it out. Finally had to break it into pieces (dangerous procedure)!!! New one went in without a problem. Don't understand why it would not come out. Thought maybe the plastic had expanded over time.
