Search results

I agree, a lot of sites have a section on detailing and it would be cool to get tips, tricks, secret formulas of those who keep our rides sparkly. I frequent Meguiars Online as well as this site and the one for my Honda CB750F Super Sport. L8R Aaron

122,000+ change on '00 Yukon SLE, original everything. We get about 265,000 out of our Sheriff Tahoes, you know how cops drive. Proper maintenance is the key! Aaron

Welcome, Nice ride, the Denali is a nice ride indeed. Take care of it, proper maintenance will keep her running a long time. Aaron

Found maybe some help on GM Trucks: may help??

Hmmmm, not having one I would take a guess that the heating element is shot, may have to get a multi meter and check the coils, voltage to seat, broken wires/shorted wires as the seat moves back and forth and go from there. Not sure if they are replaceable. Aaron

I agree with above. On our Sheriff Tahoes, the most that goes out are the fuel pumps and throw in a fuel regulator on top of that here and there. A buddy has a shop and he contracts for Fish and Game rigs and he says about the only problem with the Tahoes/Suburbans are the fuel pumps. He said...

Good to know, on my '00, it just pops right out. If I do a light replacement, I'll do a write up, not for a while though, on nights here at the ol' lockup. Great about these forums, vast knowledge by those who want our rides to keep on going. Aaron

Lookup LMC, they have a great catlogs for different chassis of Chevy/GMC as well as ....others. Pretty reasonable too. Full replacement including mounting bracket if memory serves. Plug and play baby! Aaron

I had it when we bought the Yukon with 67,000 miles, switched to Mobil 1, no more piston slap. Only time it rears it's ugly head is towards the tail end of the 5000 mile change to remind me it's close. Car runs great with 122,000+ miles on the clock. Give it a whirl, don't worry, the first...

Just by luck of chance, all of my lights went out on the master switch, then after re-installing from fixing my mirror switch, two of them came back on and the front passenger side came back on. They could be tied. The contacts on the overide switch could be shot if you use it a lot (I do to...

piston slap..... I run Mobil 1 with Napa Gold/Wix filters, no more piston slap. 120,000+ miles on the clock

Good, probably the light works now too? I have two lights out on power windows. I may tear apart and replace someday with the couple that are out in the radio too. Good show Aaron

yep, fuse box under hood, blade type of fuse, can't remember the amps though. Aaron

my drivers side fog light had condesation, upon removing them, they almost fell apart in my hands. Lucky I guess, same rig as sig, the vertical fog lights, I cleaned them up with PlastX, used I think it's called "auto goop" to seal them back up and put back, no more condensation and they are...

yep, cause there's no power to it. Not knowing what year your car is, the fuse should be under the hood. Good luck with AC, may be a clutch, or worse compressor. Aaron

You can't get power to the port for the scanner? Check the cigarette lighter fuse, often times this blows out and knocks power out on the scanner port. I had the same problem, phones charging, ipods, gameboys etc plugged in and eventually blew the fuse, we have 3 ports on the yukon, and now...

There is an orange wire that runs down the shifter to the column, that orange wire tends to break, making the tow/haul not work. Aaron

Check Radio Shack, don't have a part number handy, but I know they sell them. Check your voltage for ones that work and use the same voltage, I read somewhere that it's 1.5 volts.... Aaron

The connector is fused via the cigarette lighter, if your cig lighter is out, you found your culprit, fuse is underhood I believe, replace it, back in business. Aaron

having had my power window switch apart, it's merrily a rubber piece with contacts on them, if they get dirty and the printed circuit board get dirty, they won't work. The switch comes apart easily enough (don't break any of the tabs), take apart, clean with alcohol put back together and see if...