Search results

565 each?!?:eek2: I only paid 200 per wheel for my all black 22's

it is physically impossible. look at the doors and the wheelwells.

if you have a suburban or yukonXL you can make then go all the way down. ...As for the tahoes,yuks, and short sclades the door is smaller than the window so the only way you could get it to go all the way down is cut the bottom of the door off....so no, i have checked this out...

I run 44 Lbs all the way around. (305-40-22) rides like its on a cloud, a little stiffer than stock but perfect for me.

get some clear silicone and fill the holes up.. wont look really pretty up close but it wont leak. i just took my cross rails off and left the side runners, I like the low profile look.

every emblem on the '00 - '06 tahoes are stick on. I took all mine off..."debadged"

http://tahoeforum.com/showthread.php?t=7094 That might help you, i know its '00-'06 but they are still all black rims...

I ran a hifonics in a friends dodge ram. With 2 logic 10's running at 1/2 ohm. It did the exact same thing. Lots of amps going through the wire gets hot, get larger gauge wire (less resistance)

I just re-oiled mine. its bright-ish red. you need a re oil pretty bad. you will notice a performance increase too....:yesnod:

I can help out with this too if you live in DFW. vv

Dealer. Ebay. StylinTrucks... i dont know

I have 305-40-22 on my truck and its lowered. Discount tire said that was the biggest I could do "at stock ride height" without rubbing.

EEEWWWW POO!!!!!

X2 :yaya:

it is a dual fillament bulb. for the parking lights and the brake. try another bulb.... make sure its in the right way.? idunno:confused2:

Why even fuse it? your only running a new wire parallel to another OEM wire that is not fused. Are you planing on wraping it around something that it can ground out on? Just keep it up out of the way and you will be fine.

And you can stand under the liftgate when its raining. stay somewhat dry.

That would be a good reason for it to be on a flatbed....:yesnod: The front clips on these chevy trucks are all bolt on, nice for a repair job like this.

Why is it being loaded on a flatbed?!?

What year is your truck? if it is an '00-'02 you can use a switched ignition in the radio harness then you will even get the time delay with the ipod. if it is an '03 up you will have to use ignition harness.