Search results

Thanks, I'm running (3) Alpine MRD-M1005, one to each sub.

Correct the box is below the window, so I can see out when I look through my mirror. Rattling....i guess there is some, mostly the rear vents above the tail lights but I can't hear them when I'm inside driving :thumbsup: I also got a box for these when I don't use my third row :thumbsup...

/\ /\ /\ What he said, you can't

Sounds like you have a faulty shock. I'm thinking that the shock cannot hold air so the rear is lower than the sensor and it's constantly sending a signal to your compressor to fill it back up. 1) Either buy new shocks or 2) Buy some air helper bags, here's my write up on them...

Maybe it's the Autoride Sensor, If it continues, I'd take it in for warranty since you have it.

I perfer the 18" Fi BTL over the L7 anyday and with 2000RMS, it's perfect. BUT thats if you want to go the SPL way. The DC level 4 are nice subs also. IMO the DD's have a weird sound, I'm not saying thier sh*tty but not my choice of subs.

What??? from you're statement, I know you're a SPL guy, to blurt out that 2 would demolish 3? in what SPL, maybe true but I'm not a SPL guy (hence Type X and sealed), so I wouldn't care how much you can meter on a TL. If I wanted to go SPL, I would've got an Fi BTL. Also you are incorrect sir...

Makes perfect sense. I'm actually gonna try a another alpine head unit I have sitting around. Thanks for the input, that's some good stuff, process of elimination!

The factory radio works perfectly. I'll try the seperate ground for the alpine. So, I'm thinking it must be the alpine head unit. It's under warranty, so I'll try to get it exchanged or fixed after I try the ground. Thanks, tann

Thanks for the quick reply, I have a 01 Denali, my antenna is the mast type on the passenger side on the top of the flare (close to the hood line) I do not have the in-glass antenna, well not that I can see. The antenna is a male type that plugs into the female (hole) in back of the...

Does anyone know if the Yukon/Tahoe has a remote power antenna? (and I'm not talking about the remote lead power wire that turns on the amp) My problem is that I installed a Alpine Head Unit and now I can't get good reception for the radio. Thanks, tann

Those are sweet and small too but, I'm happy with my free ones. LOL Alpine specs Sealed - 0.65 - 1.25 Ported - 1.00 - 2.00 Ported would've been nice but, I don't got room for 6.00 cf. BUT....it all depends, I always tend to go bigger than the listed specs even on my ported boxes even...

Thanks! Go for it!! a single ported 12 would be great, there's more room than I had thought, my box has a total of 4.2cf. Your 12 would be like 2.0 - 2.5cf ported? maybe do a downfire, so you can put stuff on top of the box.

Nope, fits like a glove. I can even slam it with the third row up (clears the excursions) I was gonna but I couldn't find (3) small ones that would fit and clear the (2) seat levers

(3) Alpine Type X (sealed) and Chambered for each sub (1.4 cf for each sub) I also wanted to keep my third row. The cut outs on the bottom are for the rear seat levers.

I agree

I ran my 0 gauge through there.

take a look at what?? realize what?? You said the bezel would cost atleast $400.00, I'm just saying that I found some on ebay for $150.00. I still give you props on your DIY! but I know for a fact that the local shop I go to, goes the '03+ bezel route. But hey, either way good luck on your...